Showing 25–36 of 39 results

  • $2.60

    This 5/16 inch fill line black is sold by the foot. It is designed to be used in conjunction with the push to connect injectors certified for use with Contrail Rockets motors. Several feet should extend out of the nozzle to prevent damage to your fill fitting.


  • $6.50

    This V is a push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation.


  • $250.00

    This Ground Suppport Equipment is designed to fly Contrail Rockets hybrid motors using Contrail Rockets 12 volt volt igniters. It will also launch other mono hybrid motors. It has a removable safety key. The fill purge arm and fire are all heavy duty electrical switches and the communication is achieved via standard 3 wire extension cords. They can be dragged thru the diry driven over and then thrown in the back of your vehicle without fear of damaging a connector. The electrical cords are not included this system has been tested to 1000 feet. An igniter lead with heavy duty alligator clips is included. The leads from the pad controller to the NOS valves can be a 6 foot zip cord with the female end cut off and spliced to your valve. This make any future repairs something you can do witoout taking your equipment out of service.


  • $300.00

    This Ground Suppport Equipment is designed to fly Contrail Rockets hybrid motors using Contrail Rockets 12/24 volt volt igniters. It will also launch other mono hybrid motors. It has a removable safety key. The fill purge arm and fire are all heavy duty electrical switches and the communication is achieved via standard 3 wire extension cords. They can be dragged thru the diry driven over and then thrown in the back of your vehicle without fear of damaging a connector. The electrical cords are not included this system has been tested to 1000 feet. An igniter lead with heavy duty alligator clips is included. The leads from the pad controller to the NOS valves can be a 6 foot zip cord with the female end cut off and spliced to your valve. This make any future repairs something you can do witoout taking your equipment out of service.


  • $450.00

    This twin pad Ground Suppport Equipment is designed to fly Contrail Rockets hybrid motors using Contrail Rockets 12 volt volt igniters. It will also launch other mono hybrid motors. It has a removable safety key. It is designed to independently fill two rockets at the same time it has two independent arm switches and a master fire switch. This allows to rockets to be filled and then both launched with the same fire command. Great for drag racing. It is also possible to have one pad controller at a different location so both close and far pads can be launched from one hand controller. The fill purge arm and fire are all heavy duty electrical switches and the communication is achieved via standard 3 wire extension cords. They can be dragged thru the diry driven over and then thrown in the back of your vehicle without fear of damaging a connector. The electrical cords are not included this system has been tested to 1000 feet. An igniter lead with heavy duty alligator clips is included. The leads from the pad controller to the NOS valves can be a 6 foot zip cord with the female end cut off and spliced to your valve. This make any future repairs something you can do witoout taking your equipment out of service.


  • $75.00

    This Krytox is oxygen safe and recommend for any parts that are in contact with the liguid NOS.


  • $9.00

    This Medium Injector 3/16 line 1/8 NPT is a push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation.


  • $20.00

    This is the grease recommended for use in the bolt together motors. It helps to insulate the grain from the tube and also acts as a seal to reduce gas flow around the outside of the grain.


  • $20.00

    This RFF-Fast injector 3/8 line red cap 1/4 NPT is a custom machined push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation. This speed is achieved using the # 7 CNVA only. Special instructions are included on how to insert fill line into fitting to ensure proper operation.


  • $6.50

    This Slow Injector 1/8 line 1/8 NPT is a push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation.


  • $9.50

    This X-Fast Injector 5/16 line 1/8 NPT is a push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation.


  • $6.50

    This X-Slow Injector 1/8 line 1/8 NPT is a push to connect fitting is designed for use in the Contrail Rockets motor system. The fill line is matched to the use of this fitting and the use of the Pyrodex Pellet ignition system. It is necessary to use a matched graphite nozzle to ensure proper motor operation. This speed is achived using the # 1 CNVA only.